Payment & Shipping Terms:
|Voltage:||200-240V AC Or 100-277V AC||Power Factor:||PF>0.95|
|Lighting Angle:||TypeII, ME1-ME5||Color:||Black(RAL9005)|
led lamp street light,
led lights street lights
LED Sidewalks Light 180W LED Street Light Excellent Performance CE,ROHS
|Insulation Grade||Class I|
|Lighting protection Grade||10KVA|
|LED Chips||Lumileds 3030|
|Driver||Brand Meanwell XLG|
|Installation Options||RA:Rail installation SR: Straight rod installation|
LED Street Light Feature
1) Power turn off Protector : When the lamp maintance,Open Lamp flash,Internal power lamp. Protect the safety of personnel.
2) WAGO quick connector : disassemble easily which reduces maintance costs.
3) Surge protection device (10KV) :Drive power,extend the life of product.
4) Level bubble:Easy for the installer to adjust the position of the lamp.
Multiple Light Distribution Option
Street light has a wide range of applications and also these light distribution curves have strict requirements. In order to meet these
professional requirements and to comply with the CIE140/EN13201/CJJ45 standard, we designed two different light distribution.
Under the premise of meeting the requirements of safe and comfortable lighting and general use of the product, the road with
different road widths should be covered with less light as much as possible. Me1 and ME2 are suitable for multi-lane arterial roads
and expressways.ME3, ME4 and ME5 are suitable for two-lane or single-lane roads and side roads.
The narrow distribution also can be used to two-lane carriageway. you
can use to apply wide walkways, access road and side roads. Spacing
height ratio of luminary can reach 3.8, according CIE140/EN13201
requirement (ME3~ME5),those parameters [Lav,U0,UI,TI,SR] are passed in
Intelligent Street lighting system
A total solution for intelligence street lighting system was provided by SUNLUXX.
This street light intelligence system is consist of software,concentrator,terminal controller.
The concentrator controller is installed in the distribution cabinet, the terminal controller is installed in the lighting terminal.
It proceeds with communication via GPRS/CDMA/WCDMA wireless network & monitor center and proceeds with communication via ZIGBEE/PLC.
Concentrator controller can control each terminal controller via receiving, executing, forwarding PC management software,which can control each lamp's switching on/ off or dimming, then save electric energy to achieve failure lamps function.
Concentrator controller can built-in DO to achieve street light loop control, it can connect with other equipment to collect local illumination,temperature and other information, feedback to PC management software and achieve to monitor the current information.
Optical control function is supported by optional
If the fixture with PHOTO CONTROL function, the photo Receptacle will be installed on the cover of fixture.See A.
Fit the pins of Photo Sensor to Photo Receptacle, firmly insert and rotate Photo Sensor to proper position.
Make sure all the connections done and photo control is well installed on the fixture,switch on the power supply and cover the window of photo sensor, wait 5 seconds, the fixture will be turned on.
Use in Varies Areas
Contact Person: Alice Pan